• Call Us Now
  • +86-769-82766709

How to use Automatic CNC Engraving Machine correctly?

How to use Automatic CNC Engraving Machine correctly?


          When using Automatic CNC Engraving Machine, it is forbidden to place any objects on the machine table or crossbeam, and hold the hand on the bed of the machine tool such as crossbeam and protective cover. The body cannot lean on the bed of the machine tool. Do not knock on the Automatic CNC Engraving Machine, hit the motor shaft, and prohibit knocking when unloading the tool. It is forbidden to use the machine tool when it is overheated or cold. Since the engraving machine is a light-weight processing equipment, the sum of tooling fixture, workpiece weight and processing scraps should not exceed the extra load-bearing capacity of the machine tool.

           Before carving, you should carefully check the scale of the tool used, whether the performance meets the processing programming requirements. Before machining, carefully check whether the tool path is correct. Before starting processing, it is necessary to re-confess whether the starting point of each axis is correct. It is necessary to let the motor spindle of the CNC engraving machine rest for 2h every day.
Automatic CNC Engraving Machine
           When it is forbidden to plug in and insert electric wires, boards and electrical devices, and process organic materials and other flammable products, effective fire prevention methods must be provided on the job site. After finishing the work every day to stop the machine, you need to lubricate and scrub the Automatic CNC Engraving Machine machine to clean the machine. Confess that the machine tool is stopped, stop the machine at the specified position, block the power supply, and confess that all switches have been turned off before they can be separated.

Get In Tohch