• Call Us Now
  • +86-769-82766709

Selection skills and maintenance methods of cnc glass cutting machine

Selection skills and maintenance methods of cnc glass cutting machine

      Selection skills of cnc glass cutting machine:
      1. Selection
       According to the actual cutting layout of the enterprise itself, if you choose the one that is suitable for you, you must consider whether your product structure is suitable for the selected cnc glass cutting machine. At the same time, it is necessary to consider the size of the cnc glass cutting machine and whether there is enough space for placement. The conventional cnc glass cutting machine is generally about 18 meters long and 3.5 meters wide.
      2. Cutting accuracy
      Choose according to your own actual needs. This is mainly a deep technical study, such as: the control of the cutter wheel, the running-in of the rack and pinion, the reasonable design, the level of the control system and the measurement in the actual cutting. Because only in this way can we fully grasp the synchronization control level of the cutting machine part and the control system.
cnc glass cutting machine
     3. Cutting speed
     Let's talk about speed on the premise of meeting the cutting accuracy. You can use the software simulation function in the servo driver of the cutting machine to check whether the motor speed can reach higher.

    4. Simple operation and convenient maintenance
    Due to the particularity of the job, people with high education or high level are rarely arranged to work, so the operation of the cutting machine is required to be simple, easy to understand, safe and stable. And it should be easy to maintain to avoid the embarrassing situation that can afford equipment and cannot support equipment.

     5. Save energy
      When the cutting requirements can also be met, choosing energy-saving cutting opportunities will bring many benefits to the enterprise, such as saving part of the daily production costs, protecting the environment, and saving energy.

     6. Good design coordination
      All mechanical parts, electrical parts and other parts have been rigorously calculated, and the combinatorial coordination is reasonable and reliable to avoid a series of problems that affect production caused by incoordination.

     Maintenance of cnc glass cutting machine
     1. Make sure that the laser tube is filled with circulating water before working
      The cnc glass cutting machine automatically flows into the water tank, first open the water tank, take out the water pump, then remove the dirt on the water pump, clean the water tank, replace the circulating water, restore the water pump back to the water tank, and finally insert the water pipe connected to the water pump into the water inlet and arrange Good connections. Power on the pump alone and run for 2-3 minutes.

      2. Fan cleaning
      As the fan is used for a long time, a lot of solid dust will accumulate in the fan, causing the fan to produce a lot of noise, which is not conducive to exhaust and deodorization. When the fan has insufficient suction power to exhaust smoke, first turn off the power, remove the air inlet and outlet pipes on the fan, and remove the dust inside, then turn the fan upside down, pull the blades inside, and finally Install the fan until it is clean.

     3. Cleaning the lens
      The lens needs to be wiped gently, and the coating on the surface should not be damaged. During the wiping process, it should be handled gently to prevent it from falling. At the same time, please keep the concave surface down when installing the focusing lens.

      4. Clean the guide rail
      Guide rails and linear shafts are one of the core components of the equipment, and their function is to play a guiding and supporting role. In order to ensure the high processing accuracy of the machine, the guide rails and straight lines are required to have high guiding precision and good machining quality of the cnc glass cutting machine. Therefore, the daily maintenance of the guide rails and linear axes must be done carefully.

Get In Tohch