• Call Us Now
  • +86-769-82766709

What are the precautions for daily maintenance of High Precision CNC Engraving Machine

What are the precautions for daily maintenance of High Precision CNC Engraving Machine


        We know that the machine needs regular maintenance to ensure long-term use, so that the hidden troubles can be better eliminated in the bud, which is conducive to prolonging the life of the machine. Natural CNC engraving machine is no exception, today for everyone Introduce the daily maintenance precautions of High Precision CNC Engraving Machine.

         General CNC engraving machine daily maintenance instructions:
 
   1. First of all, it is necessary to regularly check whether the circulation system and the oil supply device are normal, so that when the winter is cold, the antifreeze and turbine oil can be replaced in time. In bad weather, if the antifreeze is not replaced in time, the water pipe will freeze, and the cooling water will freeze on the main shaft. This can easily cause the main shaft to freeze and crack. When the weather becomes cold, the oil will As the oil becomes thicker, the oil circuit will slowly start to flow. If the gasoline engine oil is not replaced in time, it may cause a failure of the fuel supply system.
 
   2. When using High Precision CNC Engraving Machine, it is also necessary to pay attention to the cooling of the spindle and the temperature of the motor spindle at any time to prevent damage caused by overheating of the spindle. Some engraving machine manufacturers are not equipped with a circulating cooling system. When the temperature is too high, always pay attention to increase the temperature of the water tank to add new cold water. Stone carving machine equipment without a circulating cooling system is very likely to cause damage to the electric spindle, so when purchasing Care must be taken to keep your eyes open.
 High Precision CNC Engraving Machine
   3. High Precision CNC Engraving Machine must ensure good grounding when used, so as to reduce static interference and improve the stability of the machine and the protection of the operator. Lightning strikes in rainy days are not artificial and can generally be controlled, so it is recommended not to operate the machine in thunderstorms, and the power supply should be completely disconnected.
 
         4. It is necessary to maintain the ventilation of the workshop during operation. It is necessary to check whether there is dripping in the workshop. Although the engraving machine is generally a solid steel or cast iron structure, the water droplets on the engraving machine may cause rust damage; at the same time, avoid work The environment is too humid, causing the electronic components NE in the distribution box of the engraving machine to cause short circuits and other unnecessary failures.
 
          5. If the engraving machine is not used for a long time, it should start idling and running regularly to ensure the lubrication of the transmission system, and do the related regular dust removal and dust removal work. This is to avoid the accumulation of dust and affect the heat dissipation of the appliance to prevent burning. Bad short circuit;
 
          6. In the peak period of power consumption, the unstable voltage of the power supply line occurs from time to time, and the main shaft of the engraving machine will often stop on the stone engraving machine, and the driver will overload and burn out in the lower engraving machine. Customers are recommended to buy the engraving machine When you need to polish your eyes, choose a higher engraving machine to reduce unnecessary losses.

Get In Tohch